production process of display cabinets

Display case making is a customised type of product, it is not like a standard type of product where you just pay the money and buy it away. All the data are customised according to the actual situation on site. Only after determining the actual size of the site to be able to carry out the later material openings, so that the production of the showcase will also be consistent with the actual size of the customer's area, will not waste a drop of space.

1. display cabinets production plant in the selection of the corresponding material will also be based on the customer actually want to place the product to choose after determining the material and size should be based on the size of the actual material processing, this time need to pay attention to is the line of the beautiful and smooth edges, so that the products can be made very beautiful.

2. In the paint treatment should be carried out before the surface of the sanding, sandpaper, sanding tools used here, can not be too hard, can not be too small, the strength of this intermediate only experienced masters can control.

3. In the sanding is completed after the two paint treatment, which includes the primer and topcoat coating, in the process of coating must maintain the uniformity of the paint surface, so that after drying the surface will have a very good gloss.

4. Packaging is in order not to damage the surface of the items in the transport process, generally will be made in the display cabinets up and down, left and right all around the Polycarbonate and other bubble protection devices.